Factory Warehouse Epoxy Floor Paint Coating

Factory Warehouse Epoxy Floor Paint Coating

Parameter
Related products

Parameter

Factory Warehouse Epoxy Floor Paint Coating factory

Factory Warehouse Epoxy Floor Paint Coating manufacture

Product Description

Factory Warehouse Epoxy Floor Paint Coating details

Product Description

Jinling epoxy floor paint is a two-component solvent-free anti-corrosion epoxy floor paint. Nice appearance, dust &corrosion resistant and easy to clean.
The whole coating system can bond well with the solid base and has good abrasion and wearing resistance. Meanwhile, it is
resistant to compression and impact and can stand heavy-duty load to a certain extent.

Specification

Color	Any solid color
Mix Ratio	JD-148A:JD-148B=5:1
Compressive strength (Mpa)	≥85
Impact resistance strength (Kg·cm)	65
Flexural strength (Mpa)	≥75
Adhesive force grade	1
Hardness (Shore D)	≥83
Abrasion resistance(750g/1000r, zero gravity, g)	≤0.03
Resistance to engine oil, diesel oil for 60 days	Passed
Resistance to 20% sulfuric acid for 20 days	Passed
Resistance to 20% Sodium hydroxide for 30 days	Passed
Resistance to toluene, ethanol for 60 days	Passed
Service life	8 years

Features&Application

Factory Warehouse Epoxy Floor Paint Coating supplier

Where to Use:

It is mainly used for concrete surface where has compression & wearing resistance and anti-dust and corrosion requirement, such as Car Parking, industry workshop, office, warehouse, foodstuff factory etc.

Application instructions:

Surface preparation	Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles,oil,grease,and other contaminants.
Primer	Prepare a barrel, pour JD-D10A and JD-D10B in it based on 1:1. Stir the mixture well and then apply it with roller or trowel. The reference consumption is 0.15kg/m².The main purpose of this primer is to seal the substrate completely and avoid air-bubbles in the body coat. A second coat may be required depending on the oil absorption condition of substrate. The recoat time is about 8 hours.
Inspection standard for the primer: even film with certain brightness.
Undercoat	Mix WTP-MA and WTP-MB based on 5:1 first, then add quartz powder (1/2 of the mixture of A and B) into the mixture, stir it well and apply with trowel. The consumption quantity of A and B is 0.5kg /sqm. You can do it one coat at one time or two coats at two times. In the second case, the application interval is about 8 hours at 25 degrees. Sand the first layer, clean it and then apply the second layer. After the whole application, wait another 8 hours, grind it, clean the sanding dust and then continue the next procedure.
Inspection standard for the undercoat: Non-sticky to hand, no softening, no nail print if you scratch the surface.
Top coat	Mix JD-2000A and JD-2000 B based on 5:1 and then apply the mixture with spatula. The consumption quantity is 1.0kg/sqm.
Maintenance	5-7 days. Don’t put the floor into use or wash it with water or other chemicals.

Company Profile

FAQ

Q1 Are you a manufacturer and support factory site visits?
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.

Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based environmental protection coatings, automotive coatings and so on.

Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.

Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.