+86-514 86801782
All Categories

primer for epoxy

Grades Skipped: Have you outgrown school epoxy? That’s great! The very first step is to prepare your surface, it should me more about Prep right? This is very far from the case, and hence it pays to thoroughly prepare for absolutely everything that can. Without properly preparing your floor the epoxy may not bond well making it eventually peel or scratch easily. Therefore, we want to be very careful not to land there and so I compiled few step by steps which could help you!

Above all, your surface must be clean. Start with some soap and water to cleanse it As it will remove any dirt or even grime, along with wiping off the dust from your surface Fill the steel vessel up with water while rinsing it very well. You must then allow it to dry entirely.ises The epoxy would also not stick well if it was still wet, and may fail over time.

Epoxy Priming 101

You may need to sand it down a bit as well. The sanding gives the epoxy something to strap itself on to. Repair any surface cracks or holes. This will ensure an adequately flat level plane to show off your new epoxy. Now, you would need to clean the surface with rubbing alcohol and allow it to dry before sanding.

Next, we are going to talk about a thing called epoxy primer. Epoxy primer: One of the most important type of paint is epoxy primers, because these act as the base for your project. It also helps with adhesion of epoxy to a surface Think about it like little helper for making an awesome resin bond- your personal life resin warrior...

Why choose JINLING PAINT primer for epoxy?

Related product categories

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now

Get in touch